FAQs
Samrat Exterior Grade High-Pressure Laminate (HPL) is a weather-resistant, durable, and UV-stable surfacing material designed for facades, exterior cladding, and outdoor applications.
Samrat Exterior HPL is available in thicknesses from 6mm to 25mm and in standard sizes of 1300x3050mm, 1220x3050mm, and 1220x2440mm.
Samrat HPL is scratch-resistant, impact-resistant, and moisture-resistant, ensuring long-term durability in extreme weather conditions.
No, it is manufactured with high-performance UV-resistant technology, ensuring long-lasting color stability and fade resistance.
Yes, our fire-retardant HPL meets international fire safety norms, reducing flame spread and smoke emissions.
Unlike ACP, Samrat HPL is more impact-resistant, scratch-resistant, and has a natural finish. Compared to stone, HPL is lightweight, easier to install, and cost-effective.
Samrat offers a wide range of finishes, including solid colors, woodgrain, metallic, stone textures, and digitally printed surfaces.
Yes, it is moisture-resistant, termite-proof, and does not corrode, making it ideal for humid and coastal environments.
With proper installation and maintenance, Samrat HPL lasts over 20 years and comes with a warranty of up to 10 years.
Regular cleaning with water and mild detergent is sufficient. No painting, polishing, or sealing is required, ensuring low maintenance.
Technical FAQs
Samrat HPL consists of kraft paper layers impregnated with thermosetting resins, compressed under high pressure and temperature, and finished with a UV-resistant decorative layer for enhanced durability
Density: ~1.35 g/cm³
Flexural Strength: >100 MPa
Water Absorption: <3%
Fire Resistance: Class B-s1, d0 (as per EN 438)
UV Stability: ISO 4892-2 compliant
Mechanical fastening (rivets, clamps, or screws) for ventilated facades.
Adhesive bonding for smooth and flush installations.
Sub-frame systems for structural support and air circulation.
No, Samrat Exterior HPL is self-sealed and does not require additional edge sealing.
Yes, it can withstand wind pressures of up to 2.5 kPa, making it ideal for high-rise buildings and extreme weather conditions
Yes, its lightweight and flexible nature makes it ideal for seismic-resistant structures when installed with a ventilated facade system.
Samrat HPL is resistant to temperatures ranging from -50°C to 80°C, ensuring stability in both hot and cold climates.
Yes, it can be cut, drilled, and routed using carbide-tipped woodworking tools, ensuring precision without chipping.
Yes, it is resistant to most industrial chemicals, acids, and cleaning agents, making it suitable for urban and industrial
environments.
Installation & Maintenance FAQs
Samrat HPL can be installed using:
Mechanical fastening (rivets, clamps, or screws) for ventilated facades.
Adhesive bonding for seamless finishes on smooth surfaces.
Sub-frame systems for enhanced structural stability.
It is best to use carbide-tipped saws, drill bits, and routers for precision cutting and drilling without chipping.
Yes, a minimum 5-8mm expansion gap is recommended to accommodate thermal expansion and prevent warping.
Regular cleaning with water and a mild detergent is sufficient. Avoid abrasive pads, strong acids, or alkaline cleaners to preserve surface quality.
Yes, it can be mounted over old surfaces using a proper sub-frame system for support.